Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on the Ford C-Max

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

See other generations:
Video tutorial

Today, we will go through the necessary guide to disassemble and replace the dipped or main beam bulb of the front headlight on the Ford C-Max. First, open the bonnet of your car and start unscrewing the fixing screws of the headlight unit to detach it from the bodywork; then disconnect the electrical connector of the bulbs located underneath, as shown in the video.

At this point, remove the protective cap of the bulbs by unhooking the metal clip to replace it with a new one (having the same fitting); then reassemble the headlight unit!


Updated on 14 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs on a Ford C-Max
How to Replace the Front Headlight Bulbs on a Ford C-Max
Ford C Max (2003-2010 / MK 1) Learn how to replace the front headlight bulbs on a Ford C-Max: open the front bonnet by pulling the lever located at the bottom right of the dashboa…
Replace Front Headlight Bulbs on Ford C-Max
Replace Front Headlight Bulbs on Ford C-Max
Ford C Max (2010-2019 / MK 2) Need to change the front headlight bulbs because they are damaged? Here’s how to remove them on a Ford C-Max. Open the front bonnet by pulling the le…
How to Replace the Front Headlight Bulbs on a Ford C Max
How to Replace the Front Headlight Bulbs on a Ford C Max
Ford C Max (2003-2010 / MK 1) How do you replace the front headlight bulbs on a Ford C Max? Follow this guide: open the bonnet of the engine compartment, remove the plastic inspec…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos