Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Ford C-MAX?

Model: Ford C Max MK 2 - Years 2010-2019
Part: Battery

In this tutorial, see how to replace the battery in a Ford C-MAX, a very simple operation. Before proceeding, ensure the key is not in the ignition for safety. Start by opening the boot, then remove the lower front panel and the duct beneath it by unscrewing the relevant screws. Once done and access to the battery is obtained, loosen the nuts on both terminals with a 10 mm spanner and disconnect them, starting with the negative. Finally, unscrew the long lower fixing bolt, extract the battery from its housing, and fit the replacement by following the reverse procedure.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery on a Ford C-Max
How to Replace the Key Battery on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Start by inserting the tip of a thin but sturdy tool into the slot on the top side of the key fob for your Ford C-Max, then lever it open. Next, dise…
How to Replace the Battery on a Ford C-Max
How to Replace the Battery on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Learn how to replace the battery on a Ford C-Max: open the boot of the car (in the C-Max, the battery is located at the rear) and uncover the fabric/…
Replacing the Battery on the Ford C-Max 2
Replacing the Battery on the Ford C-Max 2
Ford C Max (2010-2019 / MK 2) In this guide, discover how to remove and replace the battery on the second series Ford C-Max in simple and quick steps. First, locate the battery in…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos