Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Wheel Bearing on the Ford F-350

Model: Ford F-350 Phn131 - Years 1999-2007
Part: Bearing

In this brief guide, find the instructions to remove and replace the wheel bearing on the Ford F-350. First, lift the vehicle and remove the front wheel; then unscrew the bolts securing the front brake caliper to remove it from the rotor. Next, unscrew the center nut of the wheel bearing to remove it and replace it with the new one; tighten it fully and reassemble the braking system, replacing the brake pads if necessary, following the video tutorial to the end!

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulbs on a Ford F-350?
How to Replace the Rear Headlight Bulbs on a Ford F-350?
Ford F-350 (2011-2016 / P473) In this tutorial, you will see how to replace the rear headlight bulbs on the Ford F-350 pickup, a very simple and quick operation. You will only nee…
How to Replace the Windshield Washer Nozzles on the Ford F-350
How to Replace the Windshield Washer Nozzles on the Ford F-350
Ford F-350 (2008-2010 / P356) Today, you will learn in this video tutorial how to remove and replace the windshield washer nozzles on the Ford F-350 by following these simple step…
How to Replace the Headlight Bulb on a Ford F-350 (2008)
How to Replace the Headlight Bulb on a Ford F-350 (2008)
Ford F-350 (2008-2010 / P356) In this tutorial, you will learn how to remove and replace the headlight bulb on a Ford F-350 by following these simple steps. First, open the hood o…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos