Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Wheel Controls of the Ford Mondeo

Model: Ford Mondeo / Fusion MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Push button

See other generations:
Video tutorial

In this guide, you will see how to remove and replace the steering wheel controls of the Ford Mondeo by following these simple and quick steps. First, open the bonnet and start by disconnecting both battery terminals; then get inside the vehicle and begin by removing the steering wheel airbag, disconnecting the electrical connector found at the back, as illustrated in the video.

At this point, undo the central bolt of the steering wheel, unscrewing the button panel screw and the electrical connector; replace any faulty buttons and reassemble everything!


Updated on 29 July 2026 by ScegliAuto


Related tutorials

Reset of the tire pressure warning light for the Ford Mondeo
Reset of the tire pressure warning light for the Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) Today's instructions will guide us through resetting the tire pressure warning light on the Ford Mondeo. Before carrying out the reset of the TPMS se…
How to disassemble the steering wheel and its airbag of the Ford Mondeo
How to disassemble the steering wheel and its airbag of the Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Below we will see the instructions that will allow us to disassemble and replace the steering wheel and its airbag of the Ford Mondeo. First of all, …
How to Reset the Service Light on a Ford Mondeo
How to Reset the Service Light on a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) The following steps will show you how to reset the maintenance service light on a Ford Mondeo. First, get inside the vehicle and start the instrument…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos