Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford Mondeo?

Model: Ford Mondeo / Fusion MK 4 - Years 2014-2021
Part: Service warning light

As shown in this tutorial, resetting the service light on a Ford Mondeo is a very simple and quick operation. Before proceeding, ensure you have completed all required maintenance tasks. Start by inserting the key but keep it in the initial position, then fully depress the accelerator and brake pedals and turn on the ignition. At this point, hold both pedals down for about 20 seconds, or until the reset message appears on the display. Finally, restart the vehicle.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Ford Mondeo?
How do you reset the Service light on the Ford Mondeo?
Ford Mondeo / Fusion (2007-2014 / MK 3) The Service indicator that appears on the instrument panel of the Ford Mondeo can be reset by inserting the ignition key into the corresponding slot:…
How to Reset the Service Light on a Ford Mondeo?
How to Reset the Service Light on a Ford Mondeo?
Ford Mondeo / Fusion (2014-2021 / MK 4) .. In this tutorial, you will learn how to reset the service light on a Ford Mondeo, a very simple and quick operation that should only be.. …
How to Reset the Tyre Pressure Light on the Ford Mondeo MK5
How to Reset the Tyre Pressure Light on the Ford Mondeo MK5
Ford Mondeo / Fusion (2014-2021 / MK 4) In this tutorial, you will learn how to reset or clear the tyre pressure light on the Ford Mondeo fifth generation. Before performing this operation,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos