Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from the Ford S-Max Dashboard

Model: Ford S Max MK 2 - Years 2016-2024
Part: Instrument cluster

This guide outlines the steps to remove and replace the instrument cluster from the dashboard of the Ford S-Max, following the instructions below. First, get into the vehicle and open the side panel located on the left of the steering wheel; then, remove the screws from the plastics underneath, as shown in the video. At this point, remove the plastic cover located beneath the instrument cluster; then, unscrew the fastening screws of the cluster using a cross-head screwdriver, so you can remove it and replace it with the new one!

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Glove Compartment on the Ford S-Max
How to Remove the Glove Compartment on the Ford S-Max
Ford S Max (2006-2016 / MK 1) In this brief guide, you will find instructions on how to remove the glove compartment from the dashboard of the Ford S-Max second series, following …
How to Reset the Service Light on a Ford S-Max?
How to Reset the Service Light on a Ford S-Max?
Ford S Max (2006-2016 / MK 1) To reset the service light on a Ford S-Max, insert the ignition key into the corresponding lock to turn on the instrument cluster. Once it is on, pre…
How to Reset the Service Light on a Ford S-Max?
How to Reset the Service Light on a Ford S-Max?
Ford S Max (2016-2024 / MK 2) In this tutorial, see how to reset the service light on a Ford S-Max, a very simple and quick operation to perform only after completing all schedule…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos