Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Checks and maintenance

To remove the front door inner panel of the Ford Focus, start with the handle cover, which is clipped in and can be removed by prying from the bottom. Use an 8 mm spanner to undo the two internal screws. Next, remove the cover of the exit handle and the window switch panel, both of which are clipped in. Be careful to disconnect the electrical connectors on the latter. Now push the panel out from the bottom, then from the outer side, and finally from the top. The panel was actually only secured by the two screws we removed from the handle, so it comes off easily. Just be cautious of the electrical connectors.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Ford Focus SW
How to Remove the Door Panel of a Ford Focus SW
Ford Focus (2011-2018 / MK 3) Remove the battery terminals located in the engine bay. Using a screwdriver, unscrew the screws in the area of the upper door opening lever and remov…
How to Remove the Door Panel on a Ford Focus
How to Remove the Door Panel on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How do you remove the door panel on a Ford Focus? Don’t worry, here’s how to proceed. Before starting the disassembly, disconnect the battery termina…
To remove the rear door panel covering of the Ford Focus, how do you proceed?
To remove the rear door panel covering of the Ford Focus, how do you proceed?
Ford Focus (2011-2018 / MK 3) Following carefully the tutorial on present, we can notice how the protagonist carries out a job from a to z about the assembly of the rear door of t…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos