Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Front Headlight Bulb on Ford Explorer

Model: Ford Explorer MK 5, U502 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

If you're watching this video, one of the front bulbs on your Explorer has likely failed. In this video, you'll learn how to replace the old bulb in a few steps.

First, ensure you have the correct replacement bulb; ask your local parts dealer if necessary. Next, turn off the ignition by removing the key and open the bonnet.

Position yourself near the headlight to be replaced and unscrew the cap inside the bonnet. You will now have access to the bulb; remove it without damaging the electrical wires.

Now, disconnect the electrical connections from the old bulb, connect them to the new one, and reassemble. Dispose of the old bulb properly and always wear gloves.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Ford Explorer?
How to Replace the Front Headlamp Bulb on a Ford Explorer?
Ford Explorer (2006-2010 / MK 4, U251) To replace the front headlamp bulb on a Ford Explorer, open the bonnet to loosen the bolts securing the headlamp at the top. Once these two bolts hav…
How to Replace the Front Headlight Bulb in a Ford Explorer?
How to Replace the Front Headlight Bulb in a Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) Replacing the front headlight bulb in the Ford Explorer is a very simple task; let’s see how to proceed in this tutorial. First, ensure the key is no…
How to Replace the Front Indicator Bulb on a Ford Explorer
How to Replace the Front Indicator Bulb on a Ford Explorer
Ford Explorer (1995-2001 / MK 2, Un150, Un105) To replace the indicator bulb on a Ford Explorer, open the bonnet and lift the cover at the front of the engine bay; this will allow you to access th…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos