Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the High-Pressure Fuel Pump in a Ford F-150 Pickup

Model: Ford F-150 MK 12 - Years 2009-2014
Part: Fuel pump

In this tutorial, you will see how to replace the high-pressure fuel pump in a Ford F-150 pickup, a task that is extremely simple and quick. First, ensure the engine is cool enough. Then, open the hood and locate the pump, which is on the left side of the engine. Next, disconnect the two fuel lines by releasing the clips and unscrewing the collar. Remove the two mounting bolts of the pump using a socket wrench and separate the pump from the engine. To install the replacement, simply follow the reverse procedure.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Pump in a Ford F-150 Pickup?
How to Replace the Brake Pump in a Ford F-150 Pickup?
Ford F-150 (2004-2008 / MK 11) .. see how to replace the brake pump in a Ford F-150 pickup, a straightforward task that requires good manual skills due to the critical nature of the.. …
How to Remove the Rear Light of the Ford F150 Mk10
How to Remove the Rear Light of the Ford F150 Mk10
Ford F-150 (1997-2004 / MK 10) This guide shows how to remove the rear light of the Ford F150 Mk10. The process is very simple and does not require special tools. First, open the t…
How to Change the Front Grille on a Ford F150
How to Change the Front Grille on a Ford F150
Ford F-150 (2004-2008 / MK 11) To change the front grille on a Ford F150, it is advisable to spray some WD-40 on the screws holding the grille in place to make them easier to unscr…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos