Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a Ford C Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Tire pressure warning light

Resetting the TPMS light for the tyres on a Ford C Max produced from 2010 to 2019 is very simple. The first step is to start the instrument cluster and press the right arrow button on the steering wheel to access the menu. The second step is to press the down arrow button to scroll through the menu until you reach "Settings". Press the OK button and then select "Driver Assistance". The third step is to select "Tyre Service" and wait for the reset to load. Finally, switch off the instrument cluster.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on the Ford C Max 2
How to Reset the TPMS Light on the Ford C Max 2
Ford C Max (2010-2019 / MK 2) In this new mini guide dedicated to your Ford C Max Mk2 (2010-2019), you will learn the various steps necessary to manually reset the TPMS light on t…
How to Reset the Tyre Pressure Warning Light on the Ford C-Max
How to Reset the Tyre Pressure Warning Light on the Ford C-Max
Ford C Max (2010-2019 / MK 2) Follow these step-by-step instructions to reset the tyre pressure warning light on the Ford C-Max; before performing the reset, ensure all four tyres…
How to Program the TPMS Sensors on a Ford C Max
How to Program the TPMS Sensors on a Ford C Max
Ford C Max (2010-2019 / MK 2) Today, you will learn how to program the new sensors for tyre pressure monitoring on a Ford C Max vehicle. Once the new sensors have been removed and…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos