Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the timing belt on the Ford C-Max?

Model: Ford C Max MK 2 - Years 2010-2019
Part: Timing belt

To replace the timing belt on the Ford C-Max, lift the car and loosen the bolts securing the front right wheel and the corresponding wheel arch. Once these two components are removed, you can loosen the central nut of the tensioner pulley to detach it and slide off the corresponding belt. When the old belt is removed, insert the new one, following the markings on it, and tension it with the tensioner pulley. At this point, check that everything functions correctly.

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford C Max (2003-2010 / MK 1) The procedure for replacing the timing belt on the Ford C-Max is carried out by accessing the left side of the engine block: here you will find the t…
Ford C Max (2003-2010 / MK 1) The procedure for replacing the timing belt on a Ford C-Max involves opening the bonnet to access the bolts securing the protection panel on the left…
Ford C Max (2010-2019 / MK 2) The procedure for replacing the timing belt on the Ford C-Max involves opening the hood, so that it is possible to loosen the screws that secure the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos