Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Ford C-Max 1.6 TDCi

Model: Ford C Max MK 2 - Years 2010-2019
Part: Timing belt

Let's summarise how to remove and replace the timing belt on a Ford C-Max 1.6 TDCi. First, open the bonnet of your car and start by removing the cap from the radiator fluid reservoir; then remove the front right wheel and unscrew the screws of the wheel arch, subsequently disconnecting the serpentine belt, as illustrated in the video. At this point, remove the engine mount by first taking off the coolant reservoir; remove the timing cover to access the belt, following the video tutorial until the end for the replacement!

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the timing belt of the Ford C-Max?
Ford C Max (2003-2010 / MK 1) The procedure for replacing the timing belt on the Ford C-Max is carried out by accessing the left side of the engine block: here you will find the t…
Alternator Replacement for Ford C-Max 1.6 TDCI
Alternator Replacement for Ford C-Max 1.6 TDCI
Ford C Max (2003-2010 / MK 1) .. and replace the alternator of the Ford C-Max 1.6 TDCI, following the instructions provided below. First, open the car's bonnet and begin by disconnecting.. …
How to Replace the Timing Belt on a Ford C-Max
How to Replace the Timing Belt on a Ford C-Max
Ford C Max (2010-2019 / MK 2) To replace the timing belt on a Ford C-Max, open the bonnet to access the screws securing the protection panel on the left side of the engine block. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos