Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a 2010 Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Service warning light

With the instructions in this mini guide, you will be able to manually reset the oil light that keeps coming on the display of your Ford Kuga first series (2010) even after changing the engine oil and the related filter. First, get into the driver's seat and ensure that the ignition is off before starting the procedure. Next, press and hold the accelerator and brake pedals, then turn on the ignition. Wait a few seconds and once the reset is complete, release both pedals.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Ford Kuga
How to Reset the Oil Light on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) The procedure to manually reset the engine oil light on your Ford Kuga Mk1 (2008-2012) is quite simple. If you follow the instructions in this guide,…
How to Reset the Tyre Pressure Warning Light on Ford Kuga MK2
How to Reset the Tyre Pressure Warning Light on Ford Kuga MK2
Ford Kuga (2012-2019 / C520, MK 2) Let’s go through the essential steps to reset the tyre pressure warning light on a Ford Kuga second series; before performing the operation, it is ne…
How to Reset the Tyre Warning Light on a Ford Kuga
How to Reset the Tyre Warning Light on a Ford Kuga
Ford Kuga (2020-2026 / MK 3) To reset the tyre warning light on the Ford Kuga, first remove the fault, then proceed to reset the light. Start by turning on the instrument cluster…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos