Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a 2016 Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Headlight bulb

Replacing the headlight bulb on a 2016 Ford C-Max is very simple. You can do it yourself instead of going to a garage. The first step is to open the bonnet and remove the cover at the bulb entrance using a flat screwdriver. Once the cover is removed, carefully pull out the small bulb, taking care not to break the connector wire. The second step is to disconnect the connector from the bulb and fit a new bulb. Reverse the steps and close the bonnet to test the success of your operation.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of a Ford C-Max?
How to Replace the Front Headlight Bulb of a Ford C-Max?
Ford C Max (2010-2019 / MK 2) To replace the front headlight bulb of a Ford C-Max, open the bonnet to access the screws that secure the headlight from the top. Once these screws a…
How do you replace the rear headlight bulb of the Ford C-Max?
How do you replace the rear headlight bulb of the Ford C-Max?
Ford C Max (2010-2019 / MK 2) The replacement of the rear headlight bulb on the Ford C-Max is done by opening the rear hatch, so that it is possible to access the inner trim panel…
How to replace the front headlight bulb of the Ford C Max
How to replace the front headlight bulb of the Ford C Max
Ford C Max (2010-2019 / MK 2) Today we will explain how to replace the front headlight on the second generation Ford C Max. Using a Torx key, T30, we unscrew the screws located on…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos