Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Escape
    4. : How to replace the battery of the Ford Escape remote control?

Ford Escape - Video tutorial

Model: Ford Escape MK 4 - Years 2020-2024
Part: Key
Operation: How to replace the battery of the Ford Escape remote control?

In this tutorial, we can see how to replace the battery of the Ford Escape remote control, an extremely simple and fast operation. To do this, we will need a replacement battery of type CR2032 and a small flat-tip screwdriver. First, we extend the emergency metal key by pressing the appropriate button, then we insert the screwdriver into the newly freed slot, leverage it, and unlock the back door. Once this is removed, we can extract the old battery, place the replacement battery in the right direction, and reassemble everything.


Posted on 3 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Escape 2020-2026 - How do you replace the battery in a Ford Escape remote control? Read Answer
    • Escape 2008-2012 - How to fix Ford Escape door lock problem? Read Answer
    • Escape 2013-2019 - Why does central locking on Ford Escape cause problems? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos