Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Fuse Box in the Ford Ranger

Model: Ford Ranger MK 3 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fuse box

See other generations:
Video tutorial

When working on the electrical components of the Ford Ranger, it is useful to know the location of the fuse boxes for appropriate checks and potential replacement of burnt components. The first fuse box is located in the dashboard section covered by the closed door, next to the instrument cluster, and is covered by a plastic lid. The second fuse box is situated in the engine bay, on the driver's side, near the wheel arch.

To quickly locate the fuse of interest, consult the attached wiring diagram.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

Fuse box diagram and placement for the Ford Ranger.
Fuse box diagram and placement for the Ford Ranger.
Ford Ranger (2011-2023 / T6, P375, PX) The information provided in this guide will show us the layout and positioning of the fuse boxes in the Ford Ranger. First, we open the front door on…
Where Are the Fuses on a Ford Ranger?
Ford Ranger (1983-1992 / MK 1) The exact location of the fuses on a Ford Ranger is shown in the vehicle's owner's manual. However, since this model is quite old, it is likely that …
Fuse Box Diagram and Location for the Ford Ranger
Fuse Box Diagram and Location for the Ford Ranger
Ford Ranger (1998-2011 / MK 3) Below are the steps to locate the fuse boxes and their diagram for the Ford Ranger, following the instructions provided. First, get inside the vehicl…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos