Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a 2013 Ford Escape

Model: Ford Escape MK 3 - Years 2013-2019
Part: Service warning light

This video shows how to reset the oil change light on a 2013 Ford Escape if the light remains on after an oil change. To reset the light, get in the vehicle, turn the ignition to the 'On' position without starting the engine, press and hold the brake pedal and the accelerator pedal simultaneously for 20 to 30 seconds. A message will appear on the instrument panel indicating that the reset is in progress, followed by a message confirming the reset. When the reset confirmation message appears, release the pedals and turn the ignition off to ensure the reset was successful.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Ford Escape 3
How to reset the oil light on the Ford Escape 3
Ford Escape (2013-2019 / MK 3) If you want to manually reset the oil engine light of your third edition Ford Escape, all you have to do is carefully follow the steps described in t…
How to Reset the Oil Light on a Ford Escape
How to Reset the Oil Light on a Ford Escape
Ford Escape (2013-2019 / MK 3) In this video tutorial, you will see how to reset the oil light on a Ford Escape. The first thing you must do if the oil maintenance light comes on i…
How to Reset the Oil Light on a Ford Escape 3
How to Reset the Oil Light on a Ford Escape 3
Ford Escape (2013-2019 / MK 3) Manually resetting the engine oil light on your Ford Escape Mk3 (2013-2019) is very simple, and with the following guide, you will have no difficulty…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos