Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Disc and Pads

Model: Ford Galaxy MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Parking brake

See other generations:
Video tutorial

Remove the wheel in question after placing the car on suitable supports. Now, remove the steel clip that holds the brake pads in place.

Next, remove the plastic caps on the back of the brake to access the bolts that secure the two parts of the brake. Using a lever, separate the brake assembly where the pad and piston are located.

To prevent fluid loss from the piston, hang this assembly up on the shock absorber. To remove the disc, unscrew the bolts behind it. Now you can remove the disc by tapping it with a hammer to loosen it. Clean off any rust with a wire brush.

Now, using your new parts, follow the steps in reverse to reassemble everything.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Replacement of the timing belt of the Ford Galaxy 2.0 TDCi
Replacement of the timing belt of the Ford Galaxy 2.0 TDCi
Ford Galaxy (2006-2015 / MK 2) Today we will discover the instructions that will allow us to disassemble and replace the timing belt of the Ford Galaxy 2.0 TDCi. First, lift the ve…
Replacing the Fog Light Bulb on a Ford Galaxy
Replacing the Fog Light Bulb on a Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) Let's look at removing the fog light from a Ford Galaxy to replace the damaged bulbs. Start by removing the fog light from underneath the bumper. Acc…
Guide to Replacing the Fuel Pump on the Ford Galaxy 2.0 TDCI
Guide to Replacing the Fuel Pump on the Ford Galaxy 2.0 TDCI
Ford Galaxy (2006-2015 / MK 2) Today, we will discover the procedure for dismantling and replacing the diesel pump on the Ford Galaxy 2.0 TDCI. First, open the rear doors and begin…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos