Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Emblems on a Ford F-150 Pickup?

Model: Ford F-150 MK 13 - Years 2015-2020
Part: Checks and maintenance

In this tutorial, you will see how to replace the front emblem on a Ford F-150 pickup, a very simple and quick operation. Start by opening the hood, then using a flat tool, remove all the indicated rivets and take off the upper plastic cover. Next, remove the hood latch, slightly move the grille forward, and from the newly exposed gap, unscrew the single bolt securing the emblem. At this point, you can place the replacement, tighten the bolt, and reassemble everything by following the reverse procedure.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the onboard computer in the Ford F-150 pick-up truck?
How to reset the onboard computer in the Ford F-150 pick-up truck?
Ford F-150 (2015-2020 / MK 13) .. how to reset the onboard computer in the Ford F-150 pickup truck, a very simple and quick operation, to be carried out for example as an attempt to solve.. …
Where are the fuse boxes located in the Ford F-150 pick-up truck?
Where are the fuse boxes located in the Ford F-150 pick-up truck?
Ford F-150 (1997-2004 / MK 10) In this video we can see where the fuse boxes are located in the Ford F-150 pick-up and what the respective diagrams are, useful in case we need to c…
How to Replace the Display in a Ford F-150 Pickup?
How to Replace the Display in a Ford F-150 Pickup?
Ford F-150 (2015-2020 / MK 13) .. will see how to replace the display in a Ford F-150 pickup, a very simple and quick operation. First, make sure the key is not inserted. Then, using.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos