Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to remove the steering wheel of the Ford Focus Mk3

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Steering wheel
Operation: How to remove the steering wheel of the Ford Focus Mk3

The procedure allows to remove the steering wheel of the Ford Focus Mk3. The first operation to be carried out is to disconnect the negative battery cable and check the correct discharge of the capacitors of the system. At this point, turning the steering wheel 90° to the right, you can use a small screwdriver or a lever to disconnect the airbag module. Perform the same operation by turning to the left. Remove the airbag module and disconnect the electrical connectors. Disconnect the electrical connectors of the steering wheel controls and unscrew the 24mm bolt that holds the steering wheel to the steering column. Draw a line between the steering shaft and the base of the steering wheel to realign it. Remove the piece paying attention to the electrical connectors. The reassembly is carried out by following the steps in reverse.


Posted on 7 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2004-2011 - What problems could the power steering of the Ford Focus 2 present? Read Answer
    • Focus 2004-2011 - What can cause a power steering failure in a 2006 Ford Focus? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos