Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Ford C Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

This short video tutorial shows the procedure to reset the maintenance light on the Ford C Max. The procedure is very simple and takes less than 1 minute to complete. To reset the light, start the instrument cluster without starting the engine, then press the brake pedal and the accelerator pedal simultaneously, holding them for about 20 seconds.

After 20 seconds, the message "reset completed" will appear on the display; at this point, you can release the pedals and restart the instrument cluster to verify that the procedure has been completed correctly.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Ford C-Max?
How to Reset the Service Light on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) To reset the Service light on the Ford C-Max, turn on the instrument panel by inserting the ignition key into the ignition switch: once the panel is …
How to reset the Service light on the Ford C-Max?
How to reset the Service light on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) To reset the Service light on the Ford C-Max, press and hold the brake and accelerator pedals simultaneously while the instrument cluster is off. Whi…
How to Reset the Service Light on a Ford C-Max?
How to Reset the Service Light on a Ford C-Max?
Ford C Max (2010-2019 / MK 2) To reset the Service light on a Ford C-Max, turn on the instrument panel by turning the key in the ignition switch: once it is on, press the brake an…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos