Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the alternator of the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Alternator

Today we will explain how to disassemble the alternator of the Ford Focus mk2. The first thing to do is to open the front hood and disconnect the battery. The second thing to do is to lift the vehicle and then remove the right front wheel. The third thing to do is to remove the lower plastic protection, unscrewing the screws and also remove the lower bumper. The fourth thing to do is to loosen the belt tensioner to remove it in order to facilitate the removal of the sleeve. The fifth thing to do is to unscrew the alternator screws and disconnect it from the electrical connector to remove it completely. Then we start the procedure for mounting the new alternator, following the steps backwards.

Posted on 9 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Alternator from a Ford Focus 1.6 TdCi
Removing the Alternator from a Ford Focus 1.6 TdCi
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, you will learn how to remove the alternator from a Ford Focus 1.6 TdCi second series, which is also applicable to the Ford C-…
How to Remove the Alternator from a Ford Focus 1.6 TDCi
How to Remove the Alternator from a Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) Here are the instructions to remove and replace the alternator on a Ford Focus 1.6 TDCi. First, open the bonnet of your car and remove the plastic en…
How to Replace the Alternator on a Ford Focus?
How to Replace the Alternator on a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the alternator on a Ford Focus, open the bonnet to access the engine bay and locate the component, which is situated beneath the power ste…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos