Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. GMC
    3. :
  3. Sierra
    4. : Checks and maintenance

GMC Sierra - Checks and maintenance

GMC Sierra (2007-2014 / MK 3)
How to reset the oil light on the GMC Sierra?
Let's make sure that all the doors of the GMC Sierra are properly closed and then turn the key without starting the engine. At this point, we need to use the …read all…
Posted on 10 April 2023 by ScegliAuto
GMC Sierra (2014-2018 / MK 4)
How to reset the oil service in the GMC Sierra?
Resetting the oil service warning light in the GMC Sierra is a very simple and fast operation, let's see how to proceed in this tutorial. Obviously, this …read all…
Posted on 19 June 2022 by ScegliAuto
GMC Sierra (2014-2018 / MK 4)
How to reset the oil service in the GMC Sierra?
In this tutorial we can see how to reset the oil service in the GMC Sierra pick-up, a very simple and fast operation, to be carried out only after obviously …read all…
Posted on 23 April 2024 by ScegliAuto
GMC Sierra (1999-2007 / MK 2)
How to reset the oil service in the GMC Sierra?
Resetting the oil service in the GMC Sierra is very simple, let's see how to proceed in this tutorial. Obviously, this operation must be carried out only after …read all…
Posted on 8 April 2024 by ScegliAuto
Airbags (1) Shock absorbers (2) Car stereo (1) Battery (6) Key (3) Locking the trunk (1) V-belt (1) -board computer (9) Checks and maintenance (4) Headlight (2) Tail light (1) Fog lights (3) Air filter (3) Cabin air filter (5) Petrol filter (1) Diesel filter (1) Grille (4) Headlight bulb (7) Rear light bulb (2) License plate light (1) Handle (2) Gear oil (1) Engine oil (8) Door panel (2) Front bumper (1) Brake pads (1) Tires (1) Fuel pump (1) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (1) Wheel (2) Fuse box (6) Outside rearview mirror (3) Windscreen wipers (2) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos