Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Left Front Headlamp Bulbs on a Honda Insight

Model: Honda Insight - Years 2000-2009
Part: Headlight

Follow these steps to replace the headlamp bulbs on a Honda Insight. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. To replace the left headlamp bulbs: remove the radiator water reservoir, locate the inspection cap of the headlamp (located at the rear of the headlamp) and remove it. At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlamp and extract the damaged bulb using a screwdriver. Fit the new bulb (ensuring it is the correct type and size) and insert the bulb holder back into the headlamp housing. Finally, close the headlamp with the inspection cap and reattach the water reservoir. Test the lights to ensure they are functioning correctly.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Air Filter on Honda Insight 2
Replacing the Air Filter on Honda Insight 2
Honda Insight (2009-2014 / ZE3, ZE2) In today's simple video, you will see how to replace the air filter on a second-generation Honda Insight; this operation does not require any tools. …
Where to Find the Cabin Fuse Box of the Honda Insight 3G
Where to Find the Cabin Fuse Box of the Honda Insight 3G
Honda Insight (2019-2026 / ZE4) To access the cabin fuses of your Honda Insight 3G, you need to know the exact location of the fuse box that contains them. In the following guide, y…
How to set the time on the Honda Insight?
How to set the time on the Honda Insight?
Honda Insight (2009-2014 / ZE3, ZE2) In this tutorial we can see how to adjust the time in the Honda Insight, an extremely simple and quick operation, to be carried out for example after…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos