Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Speaker on Honda CR-V

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

Learn how to remove the speaker after taking off the door panel on a Honda CR-V. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever to remove the plastic trim at the corner of the window; then, with a screwdriver, unscrew the fastening screws located in the plastic handle and the space for the door opening lever.

Once all screws are removed, disconnect the window switch panel and all plastic clips securing the door.

Pull off the door panel by hand, releasing any power connectors and release cables. Unscrew the screws securing the speaker fitted in the door with a screwdriver; remove the speaker and disconnect the power connector.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Remove the Right Front Door Panel on Honda CR-V
How to Remove the Right Front Door Panel on Honda CR-V
Honda CR-V (1995-2001 / MK 1) Remove the right front door panel on the Honda CR-V. Using a screwdriver, undo the screws located in the space of the upper door handle and the screw…
How to Remove the Steering Wheel of the Honda CR-V
How to Remove the Steering Wheel of the Honda CR-V
Honda CR-V (2007-2012 / MK 3) Today's instructions will show you how to remove and replace the steering wheel of the Honda CR-V in simple and quick steps. First, get inside the ve…
How to Replace the Starter Motor on a Honda CR-V 2.4L
How to Replace the Starter Motor on a Honda CR-V 2.4L
Honda CR-V (2007-2012 / MK 3) Below are the instructions to remove and replace the starter motor on a Honda CR-V 2.4L. First, open the vehicle's bonnet and begin by removing the b…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos