Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2017 Honda Jazz

Model: Honda Jazz MK 3 - Years 2013-2019
Part: Warning light – error code

To reset the service light on this vehicle, follow these steps: turn the key and switch on the ignition. On the steering wheel, on the right side under the spoke, there are three buttons. Press the "info" button and scroll through the display on the dashboard until you reach the "service reset" option. At this point, press the "reset" button located just below the "info" button to perform the service reset. To verify the correct cancellation of the service indicator light, turn off and then turn on the ignition by turning the key.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Honda Jazz
How to reset the service light on the Honda Jazz
Honda Jazz (2013-2019 / MK 3) Today's instructions will show us how to reset the maintenance service light for the engine oil change on the Honda Jazz. First, we get into the car …
How to reset the tire pressure warning light on the Honda Jazz
How to reset the tire pressure warning light on the Honda Jazz
Honda Jazz (2013-2019 / MK 3) Following these simple steps, we will see how to reset the tire pressure light of the Honda Jazz; before performing the reset, it is necessary that a…
How to Reset the Service Light on a Honda Jazz
How to Reset the Service Light on a Honda Jazz
Honda Jazz (2008-2013 / MK 2) This brief video tutorial shows how to reset the service light on a second-generation Honda Jazz, produced from 2008 to 2013. Start by turning on the…

Other guides you may be interested in

    Frequently Asked Questions

    • Jazz 2013-2019 - What does the CTBA warning light on the Honda Jazz 3 indicate? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos