Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on the Hyundai Accent

Model: Hyundai Accent RB, RC, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Engine oil

See other generations:
Video tutorial

Today, you will learn how to change the engine oil and oil filter on the Hyundai Accent independently. Open the front bonnet and unscrew the oil filler cap to facilitate the draining of the liquid into a container.

After lifting the vehicle, unscrew the nut on the oil sump and allow the used oil to drain into the container. Refit the oil sump and replace the engine cover.

Remove the oil filter housing located near the engine and proceed with its replacement. Top up the oil in the reservoir and close the bonnet.


Updated on 8 November 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Hyundai Accent
How to Change the Engine Oil in a Hyundai Accent
Hyundai Accent (2010-2017 / RB, RC, MK 4) To replace the engine oil in a Hyundai Accent, it is advisable to warm up the engine for a few minutes, then turn it off and safely lift the vehicle.…
How to replace the rear headlight bulb of the Hyundai Accent 4
How to replace the rear headlight bulb of the Hyundai Accent 4
Hyundai Accent (2010-2017 / RB, RC, MK 4) Replacing one of the rear bulbs of your Hyundai Accent Mk4 is really simple and thanks to the procedure described in the following guide, you will be…
How to Replace the Timing Belt on a Hyundai Accent?
How to Replace the Timing Belt on a Hyundai Accent?
Hyundai Accent (2005-2009 / MK 2, MC) To replace the timing belt on a Hyundai Accent, open the bonnet to access the components in the engine bay. On the left side of the engine block, you…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos