Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Sonata
    4. : Tank breather valve disassembly instructions

Hyundai Sonata - Video tutorial

Model: Hyundai Sonata - Years 2004-2014
Part: Checks and maintenance
Operation: Tank breather valve disassembly instructions

It may happen that the tank vapor vent valve may become blocked so that the failure warning light comes on and the relative error code (P2422) is memorized; in case of blockage of this valve it is suggested to disassemble and replace it since it is a plastic device with a very important safety function; the valve is located under the left rear mudguard and in order to remove it, proceed as follows: lift the car, remove the rear left wheel and then the plastic wheel arch to access the breather valve seat; disconnect the pipes, the sockets and then unscrew the fixing pins.


Posted on 28 August 2023 by ScegliAuto



PCV valve cleaning instructions
Hyundai Sonata (2004-2014 / ) The movement of the air under the cylinders allows the oil to be injected more quickly on the walls of the cylinder, but it can modify the direction
Fuel pump replacement instructions
Hyundai Sonata (2004-2014 / ) If it happens that the engine does not start, one of the probable causes is that no fuel arrives due to a failure in the low pressure pump immersed i
Car radio disassembly instructions
Hyundai Sonata (2004-2014 / ) To be able to disassemble the original car radio of this vehicle, some elements of the dashboard will have to be removed in order to access the relat

Other guides that may interest you

    Frequently Asked Questions

    • Sonata 2010-2015 - Why do the steering wheel controls of the Hyundai Sonata not work? Read Answer
    • Sonata 2005-2010 - What is the right amount of refrigerant gas for the Hyundai Sonata? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos