Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I40
    4. : How do you reset the service light on the Hyundai I40?

Hyundai I40 - Video tutorial

Model: Hyundai I40 MK 1 - Years 2011-2019
Part: Checks and maintenance
Operation: How do you reset the service light on the Hyundai I40?

To reset the service light in the Hyundai I40, first turn on the instrument panel (the engine can remain off) and enter the onboard computer menu using the dedicated button on the steering wheel. As soon as the service expiration message appears on the dashboard display, press the button with the downward arrow located just below the menu access button. Hold it down for a few seconds, then release it and press it again for an equal amount of time. Turn off and on the instrument panel to verify that the light has been successfully reset.


Posted on 30 July 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • I40 2011-2019 - How do you turn off the "EPB" light on a Hyundai i40? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos