Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Hyundai i40

Model: Hyundai I40 MK 1 - Years 2011-2019
Part: Service warning light

To reset the service light on the Hyundai i40, you need to: -turn on the vehicle's instrument panel and press the MENU button located at the bottom of the steering wheel. -press the MENU button until you select the spanner symbol to access the service menu. -press the OK button to set the new mileage for the next service and turn off the vehicle. Conclude by restarting the vehicle to confirm the reset just performed; if this operation was unsuccessful, you can try again, but it is important to have completed the servicing operations first.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Hyundai i40?
How to Reset the Service Light on the Hyundai i40?
Hyundai I40 (2011-2019 / MK 1) Resetting the service light on the Hyundai i40 is a very simple operation that takes just a minute to complete. To reset this light, simply turn on t…
How to reset the service light of the Hyundai i40.
How to reset the service light of the Hyundai i40.
Hyundai I40 (2011-2019 / MK 1) To manually reset the service light on your Hyundai i40, simply follow the steps described below. First, start the car's instrument panel, then use t…
How to Reset the Service Light on a Hyundai i40
How to Reset the Service Light on a Hyundai i40
Hyundai I40 (2011-2019 / MK 1) To reset the service light on a Hyundai i40, turn on the ignition and press the buttons on the steering wheel to access the service menu. Select the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos