Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Control Unit on the Infiniti EX35

Model: Infiniti Ex MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Control unit

Video tutorial

In this video, we see that the control unit of the Infiniti EX35 is located in a particularly difficult-to-reach spot. The control unit is in the engine compartment but in an inaccessible position: it is mounted inside the right wheel arch (passenger side) protected by a cover.

Specifically, it is found on the passenger side (for left-hand drive vehicles), behind the right front bumper, inside the wheel arch cavity. To reach it, you will need to unscrew and move the plastic cover of the wheel arch, and it is also necessary to lift the vehicle, remove the wheel, and loosen part of the bumper to have decent working space.

Additionally, the electrical connectors may be secured with safety clips and difficult to disengage without the right tools.


Posted on 20 June 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Infiniti EX35 remote control
Infiniti Ex (2007-2013 / MK 1) If the remote control of your Infiniti EX35 has suddenly stopped working due to a completely drained battery, do not worry because in the following g…
How to Replace the Front Headlight Bulb on an Infiniti EX35
How to Replace the Front Headlight Bulb on an Infiniti EX35
Infiniti Ex (2007-2013 / MK 1) If one of the front headlight bulbs on your Infiniti EX35 is malfunctioning, don't worry. This guide explains the steps you need to take to complete …
How to start an Infiniti EX35 with a dead remote.
How to start an Infiniti EX35 with a dead remote.
Infiniti Ex (2007-2013 / MK 1) Let's see how to restart our Infiniti EX35 keyless with a dead remote. The vehicle warns us with the message "no key detected." We get into the car w…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos