Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of an Infiniti QX50.

Model: Infiniti QX50 J55 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Front bumper

See other generations:
Video tutorial

Let's see how to remove the front bumper of an Infiniti QX50: lift the car with a jack and support it on jack stands, if necessary remove the upper engine cover, and remove the 10 mm screws along the entire lower edge; detach the front part of the fender that connects to the bumper (it is not necessary to remove it completely, just free the attachment points).

Inside the wheel well, there is a hook that we will gently unlock.

Check for any hidden screws, and once all the fasteners have been removed, grasp the bumper and pull it decisively towards us. Be very careful with the electrical connectors that are still connected, such as the fog light, parking sensors, or cruise control connectors.

Once this is done, we can remove the bumper.


Posted on 24 November 2025 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on the Infiniti QX50?
How to Replace the Remote Battery on the Infiniti QX50?
Infiniti QX50 (2013-2017 / MK 1) To replace the remote battery on the Infiniti QX50, move the switch located on the back of the device to slide out the emergency key from the top of …
How to Replace the Cabin Filter in the Infiniti QX50
How to Replace the Cabin Filter in the Infiniti QX50
Infiniti QX50 (2013-2017 / MK 1) Replacing the cabin filter in the Infiniti QX50 is an extremely simple and quick operation. First, sit in the passenger seat, then unclip the lower p…
How to Reset the Service Light on the Infiniti QX50?
How to Reset the Service Light on the Infiniti QX50?
Infiniti QX50 (2013-2017 / MK 1) To reset the service light on the Infiniti QX50 after completing the necessary maintenance, press the button with the right-pointing arrow located on…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos