Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Position and Fuse Diagram on Jaguar S-Type

Model: Jaguar S-Type MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Fuse box

This video is currently unavailable

The Jaguar S-Type has three fuse boxes, all located on the right side: the first is typically found under the bonnet, specifically at the outer part of the engine compartment. Here, for example, you will find the fuses related to the windscreen wipers and the horn.

The second is located in a "usual" spot, under the glove compartment, inside the cabin. Here, among others, is the ABS fuse.

The third and final one is situated in the side wall of the boot, again on the passenger side. The most important fuses here are for the window lift motors.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Number Plate Light Bulb of a Jaguar S-Type
How to Remove the Rear Number Plate Light Bulb of a Jaguar S-Type
Jaguar S-Type (1999-2008 / MK 1) .. open the rear hatch of the boot of your Jaguar S-Type to access the rear number plate light more easily. Start by unclipping and removing the outer cover.. …
Guide to Dismantle the Automatic Gearbox on the Jaguar S-Type 4.2 V8
Guide to Dismantle the Automatic Gearbox on the Jaguar S-Type 4.2 V8
Jaguar S-Type (1999-2008 / MK 1) .. the automatic gearbox of the Jaguar S-Type 4.2 V8. First, lift the vehicle and start by draining the transmission oil; then use a socket spanner.. …
Dismantling the Key and Its Battery of the Jaguar S-Type
Dismantling the Key and Its Battery of the Jaguar S-Type
Jaguar S-Type (1999-2008 / MK 1) .. key and replacing its battery for the Jaguar S-Type. First, take your remote control and begin removing the physical key from the controls; then lever.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos