Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Jeep Compass MK2

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Instrument cluster

See other generations:
Video tutorial

In this video, see how to customise a wide range of information through the instrument cluster of the Jeep Compass using the buttons on the left side of the steering wheel. Scroll through the various information on the display, selecting them with the "OK" button.

When it's time for an oil change, a warning will appear on the gauge, accompanied by an audible message: the system is based on the work cycle, so the interval may vary depending on your driving style. The message will continue to appear until you reset the warning, which is done by turning on the ignition without starting the engine, pressing the accelerator pedal fully three times, and then turning off the ignition within ten seconds.

If the light comes back on when you restart, the system has not been reset correctly, and you will need to repeat the procedure.


Updated on 31 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Jeep Compass
How to Reset the Service Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) After completing all routine maintenance tasks such as oil change, coolant replacement, filter changes, and tyre checks, you can proceed to reset the…
How to Reset the Service Light on the Jeep Compass
How to Reset the Service Light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this guide, you will discover the steps that will show you how to reset the maintenance warning (service) of the Jeep Compass. First, get inside t…
How to Reset the Service Light on Jeep Compass
How to Reset the Service Light on Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you can see how to reset the maintenance light on a Jeep Compass by following a few simple steps for proper vehicle managemen…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos