Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Jeep Renegade Key Fob

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Key

To replace the battery in a Jeep Renegade key fob, follow these steps: take your key fob and press the metal key release button. Once the metal key pops out, use a screwdriver to pry between the cover and the key itself (in the space where the metal key fits). Pry until the two parts separate, then remove the old battery with a small screwdriver. Take a new battery of the same size and voltage. Refit the cover onto the key fob, pressing until you hear it click into place. Check the key fob's functionality by pressing the buttons.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Remote Battery on a Jeep Renegade
Replacing the Remote Battery on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Is the remote key for the Jeep Renegade not working anymore? Let's try replacing the battery. Take your ignition key, pull out the metal key, and use…
How to Replace the Key Fob Battery on Jeep Renegade
How to Replace the Key Fob Battery on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How to replace the key fob battery on a Jeep Renegade? Watch this video for detailed instructions: take your key fob and press the button to release …
Replacing the Key Fob Battery on a Jeep Renegade
Replacing the Key Fob Battery on a Jeep Renegade
Jeep Renegade (2014-2021 / ) The video shows how to replace the battery in the key fob of a Jeep Renegade. This is a very simple operation that can be done in just a minute on yo…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why is the electronic key no longer detected in the Jeep Renegade? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos