Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the heating resistor in the Jeep Wrangler?

Model: Jeep Wrangler MK 2, TJ - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial we can see how to replace the heating resistor in the Jeep Wrangler, an extremely simple and quick operation. First of all, go to the passenger side, then open the glove compartment, release the side limit rope and separate the drawer from the dashboard.

Identify the resistor in question, unscrew the relevant fixing bolt with an 8mm socket wrench and remove the resistor from the housing. At this point, all that remains is to disconnect the power connector, connect the replacement and reassemble everything following the reverse procedure.


Posted on 27 June 2025 by ScegliAuto


Related tutorials

Guide to Remove the Heater Radiator on the Jeep Wrangler
Guide to Remove the Heater Radiator on the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In today's tutorial video, you will see how to remove the cabin heater radiator on the second series Jeep Wrangler from 2010, following the instructi…
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Before you begin, sit in the driver's seat of your Jeep Wrangler. Start by adjusting the tyre pressures according to the recommended values indicated…
How to Replace Engine Oil
How to Replace Engine Oil
Jeep Wrangler Change engine oil in the Jeep Wrangler. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos