Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensor on the Jeep Wrangler

Model: Jeep Wrangler JL, MK 4 - Years 2018-2026
Part:

Below we will discover how to reset the tire pressure light on the Jeep Wrangler; before resetting the TPMS sensors, it is necessary that all four tires are at the correct pressure. So, we get into the car and start the instrument panel; then we use the arrow buttons on the steering wheel to navigate to the tire pressure monitor, setting the correct pressures. This way, the TPMS system will detect the new pressures, resetting the warning light on the instrument panel.

Posted on 8 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on a Jeep Wrangler
How to reset the tire pressure warning light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Before we can begin, we will have to go and sit in the driver's seat of our Jeep Wrangler. The tire pressure warning light comes on when the internal…
How do you reset the tire pressure light on your Jeep Wrangler?
How do you reset the tire pressure light on your Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) In order to reset the Jeep Wrangler's tire pressure warning light, you simply need to check that all the tires are at the correct inflation pressure.…
How to reset the tire pressure warning light on the Jeep Wrangler
How to reset the tire pressure warning light on the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In today's video tutorial we will see the instructions that will allow us to reset the tire pressure warning light on the Jeep Wrangler, but also on …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos