Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Key Battery Replacement on Jeep Cars

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Key

The battery used in the ignition key for Jeep cars is the CR2450 3 Volt. Using a small flat-head screwdriver, open the key housing by prying at its centre. Perform this operation carefully, detaching each small part of the housing a little at a time. Voila! The bulk of the work is already done! Now you have the sought-after battery in front of you. Again, use the screwdriver to pry under the battery itself and remove it. Insert the new battery you purchased and close the housing simply by pressing the two parts of the key together until they click into place.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of the Jeep Wrangler 3
How to Replace the Key Battery of the Jeep Wrangler 3
Jeep Wrangler (2007-2018 / MK 3, JK) Replacing the battery inside the key of your Jeep Wrangler third series (2007-2018) is a very simple operation, and with the following guide, you wil…
How to reset the service light in a Jeep vehicle?
How to reset the service light in a Jeep vehicle?
Jeep Wrangler (2007-2018 / MK 3, JK) This video tutorial clearly shows how easy and quick it is to reset the service reminder in a vehicle produced by Jeep, specifically in a 2015 Jeep W…
Remove the Key Battery on Jeep Wrangler
Remove the Key Battery on Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Is the Jeep Wrangler key battery dead and needs changing? Here’s how to remove it from inside the key. Take your remote key, and with the help of a s…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos