Do it yourself
| ||||
|
Jeep Renegade - Video tutorial
Model: Jeep Renegade
BU, 520, MK 1
- Years 2014-2023 How to reset the oil maintenance light on a Jeep Renegade. We turn on the instrument panel with the button next to the steering wheel of the car. We press the accelerator pedal with our foot three times in a row, then release the pedal and turn off the instrument panel. We turn on the instrument panel and check the maintenance carried out. We check the changes made on the instrument panel of the car and always remember to proceed with the modifications of the on-board computer when the vehicle is stopped and off (safely). We turn off the instrument panel at the end of use.
Posted on 21 January 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.035
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |