Do it yourself
| ||||
|
Jeep Renegade - Video tutorial
Model: Jeep Renegade
520, BU, MK 1
- Years 2014-2023 The guide shows you how to replace the car's remote control battery. The first operation to perform is to press the knurled tab on the back of the remote control in order to release the key that is present in the device. After this operation, just pry a little in the recess next to the key coupling, in order to uncouple the two parts of the remote control (if the key ring is present, it can be removed to have more agility to maneuver). At this point just replace the buffer battery with a new one, paying attention to the arrangement of the battery poles. By following the steps backwards, the remote control is put back together and the operation will be finished.
Posted on 20 February 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.070
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |