Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Warning light – error code

How do you reset the service light on a Jeep Renegade? Let's see how to reset the warning light that appears on the instrument cluster. Enter the vehicle and turn on the instrument cluster using the button next to the steering wheel. Press the accelerator pedal three times in quick succession, then release the pedal and turn off the instrument cluster. Turn the instrument cluster back on and check the maintenance performed. Review any changes made to the vehicle and always remember to make adjustments to the onboard computer while the vehicle is stationary and off. Start the vehicle and check the information.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service on a Jeep Renegade
Resetting the Service on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) On the Jeep Renegade, you can reset the service by following some essential steps. First, before resetting the service, perform maintenance (change f…
Resetting the service light on a 2016 Jeep Renegade
Resetting the service light on a 2016 Jeep Renegade
Jeep Renegade (2014-2021 / ) The video shows how to reset the service light on a 2016 Jeep Renegade. It is a very simple DIY operation that takes just a few minutes. It should be…
How to Reset the Service Light on the Jeep Renegade
How to Reset the Service Light on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To perform the service reset on the Jeep Renegade, follow these steps: press the start button once without starting the engine, just turning on the i…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2021 - How to reset the Uconnect system in the Jeep Renegade? Read answer
    • Jeep Renegade 2014-2026 - What to do if the brake pad warning light appears on Jeep Renegade? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos