Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light in the Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Service warning light

In this tutorial, see how to reset the oil change light in the Jeep Renegade. This simple and quick operation should only be performed after changing the oil and the related filter within the maintenance schedule. First, insert the key and turn on the ignition, not the engine. Then, within 10 seconds, press the accelerator pedal fully three times in quick succession, start the engine, and check that the operation was successful. If not, repeat the procedure, ensuring it is done within the 10 seconds.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on a Jeep Renegade
How to Reset the Oil Change Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To reset the Oil Change light on the Jeep Renegade, turn on the ignition and navigate to the menu that shows the engine oil life. To reset the light …
How to Reset the Oil Change Light on a Jeep Renegade?
How to Reset the Oil Change Light on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) Resetting the oil change light on a Jeep Renegade is very simple. Follow this procedure only after changing the oil and the corresponding filter. To …
How to Reset the Oil Light on a Jeep Renegade
How to Reset the Oil Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you start, sit in the driver's seat of your Jeep Renegade. Begin by pressing the vehicle's ignition button once to activate the instrument clu…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos