Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

In this video tutorial, see how to reset the maintenance light on the Jeep Wrangler by following a few simple steps that will guide you towards proper vehicle management. First, perform maintenance on your vehicle, such as an oil change and filter replacements.

After completing the maintenance work, you can reset the service light that remains on as follows: get in your car and sit in the driver's seat; turn on the ignition, and within 10 seconds, press the accelerator pedal all the way down and release it three times.

Now turn off the ignition and then turn it back on to check that the light has turned off.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Jeep Wrangler
How to Reset the Tyre Pressure Warning Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) To reset the tyre pressure warning light on the Jeep Wrangler, first ensure all tyres are inflated to the correct pressure value: this value is indic…
How to Replace the Starter Motor on a Jeep Wrangler
How to Replace the Starter Motor on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the starter motor on a Jeep Wrangler, access it from inside the wheel arch of the front right wheel. First, open the bonnet and disconnect…
How to Reset the Oil Service Light on a Jeep Wrangler?
How to Reset the Oil Service Light on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) In this tutorial, you will see how to reset the oil service light on a Jeep Wrangler. This operation is very simple and quick, to be performed only a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos