Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil and Filter

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Oil filter

See other generations:
Video tutorial

This guide explains how to change the engine oil of a Jeep Wrangler V6 and replace the oil filter. Use a ratchet to unscrew the oil pan plug located under the vehicle.

The old oil will drain out; once fully drained, refit the plug after cleaning it. Go to the engine bay and remove the plastic engine cover. Locate the oil filter and unscrew the bolt securing the cap with a hex socket.

Remove the old filter and compare it with the new one. Fit the new filter onto the cap, ensuring to replace the rubber gasket on the cap (included with the new filter). Refit the assembled piece as before.

Remove the upper plug of the oil pan and insert a funnel to pour in new oil. Use the dipstick to check the level. Finally, close the oil pan plug and refit the plastic cover protecting the engine.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

How to Change the Oil and Filter on a Jeep Wrangler
How to Change the Oil and Filter on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this video, see how to change the engine oil and filter on a Jeep Wrangler. In the engine bay, use a socket to unscrew the black filter cap. Lift …
How to Change the Oil and Filter on a Jeep Wrangler
How to Change the Oil and Filter on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Want to change the oil and filter on your Jeep Wrangler? No worries. Follow these steps. Lift the bonnet and secure it, then use a socket wrench to u…
How to Replace the Oil Filter and Engine Oil in a Jeep Wrangler
How to Replace the Oil Filter and Engine Oil in a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this tutorial, you will learn how to replace the oil filter and engine oil in a Jeep Wrangler by following these essential steps: First, lift the …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos