Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the Service light on a Jeep Grand Cherokee?

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Service warning light

To reset the Service light on a Jeep Grand Cherokee, press the ignition button after inserting the key to turn on the dashboard without starting the engine. At this point, hold down the brake pedal and simultaneously press the accelerator pedal three times. Once this is done, turn off the dashboard. When it is turned on again, check that the Service light has been successfully reset and is no longer present on the dashboard.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To reset the "Service" light on a Jeep Grand Cherokee, start by turning on the instrument panel without starting the engine. Use the buttons on the s…
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) To reset the tyre pressure light on a Jeep Grand Cherokee, first inflate the tyres to the pressure value indicated on the sticker attached to the dri…
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) After replacing the battery in your Jeep Grand Cherokee, the radio may reset and lock. To unlock it, you need to enter the unlock code. Start by sitt…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos