Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Service warning light

To manually reset the engine oil light on your Jeep Renegade, it only takes a few seconds. The necessary procedure is quite simple, and if you follow the steps outlined in this guide, you will complete it without any difficulty. First, get into the driver's seat and ensure that the ignition is off. Then start the ignition and simultaneously press the accelerator pedal five times in quick succession. After that, turn off and then turn on the instrument cluster to complete the oil light reset.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on a Jeep Renegade?
How to Reset the Oil Change Light on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) Resetting the oil change light on a Jeep Renegade is very simple. Follow this procedure only after changing the oil and the corresponding filter. To …
How to reset the oil light on the 2020 Jeep Renegade
How to reset the oil light on the 2020 Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In the following guide, we will explain how to manually reset the engine oil light on the dashboard of your Jeep Renegade (2020). First, sit in the d…
How to Reset the Oil Light on a 2017 Jeep Renegade
How to Reset the Oil Light on a 2017 Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To manually reset the engine oil light on your 2017 Jeep Renegade, follow these steps. First, get into the car and reach the driver's seat, then turn…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos