Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Daytime Running Lights of the Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Headlight bulb

This video is currently unavailable

Today, in this short and simple guide, you will learn how to remove and replace the daytime running light bulb of the front headlight of the Jeep Renegade. First, move to the front wheel and start removing the plastic cover found in the wheel arch; then disconnect the connector along with the daytime running light, and then remove it from it, as shown in the video.

Now install the new bulb, of the correct type and with the same fitting; then reassemble everything and, if necessary, replace the other bulbs of the front headlight as well!


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Replace the Position Lights on a Jeep Renegade?
How to Replace the Position Lights on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) Replacing the daytime running lights on a Jeep Renegade is a very easy and quick operation that does not require workshop intervention. You simply ne…
How to Replace the Key Fob Battery of the Jeep Renegade?
How to Replace the Key Fob Battery of the Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the key fob battery of the Jeep Renegade, lower the lever located at the back of the fob, just below the chrome cover. This will allow you…
How to Reset the Tyre Light on a Jeep Renegade
How to Reset the Tyre Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you can start, inflate all the tyres on your Jeep Renegade to 4 bar. Next, sit in the driver's seat to bring up the tyre screen on the instrum…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos