Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Jeep Compass MK1

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

In this video, you will learn how to reset the oil change light on a Jeep Compass MK1, specifically a 2011 model: insert the key into the ignition, turn it twice, and switch on the instrument panel. At this point, press the accelerator pedal fully three times, then turn off the ignition without removing the key, leaving it in place for a second or two. After this brief wait, start the engine, and you will see that the service light has been reset.

If the operation does not succeed, you can repeat it.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

How to reset the oil change light on the 2021 Jeep Compass
How to reset the oil change light on the 2021 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In today's article, we will show you how to reset the oil change indicator light on the Jeep Compass 2nd generation. For this operation, no tools or …
How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Before you can start, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster without starting the engine by pressi…
How to Reset the Oil Change Light on the Jeep Compass?
How to Reset the Oil Change Light on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the Oil Change light on the Jeep Compass, you need to use a diagnostic tool that must be connected to the car's OBD port, located at the bot…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos