Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the 2014 Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Service warning light

With this guide, you will be able to manually reset the oil light on the dashboard of your 2014 Jeep Grand Cherokee. Just read the following instructions carefully and then put them into practice. First, turn on the ignition by rotating the key. Then, press the accelerator pedal three times in quick succession within five seconds. Finally, wait for the oil light reset to complete, and the procedure is successfully finished. If you encounter any errors, do not worry as you can easily repeat it from the beginning.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Jeep Grand Cherokee
How to Reset the Oil Light on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Before starting, sit in the driver's seat of your Jeep Grand Cherokee. Turn the key in the ignition switch without activating the instrument cluster.…
How to Reset the Oil Light on the 2012 Jeep Grand Cherokee
How to Reset the Oil Light on the 2012 Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To correctly complete the manual reset of the engine oil light on your 2012 Jeep Grand Cherokee, follow these simple steps. First, enter the vehicle …
How to Manually Reset the Oil Light on the Jeep Grand Cherokee 4
How to Manually Reset the Oil Light on the Jeep Grand Cherokee 4
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this guide dedicated to all owners of a Jeep Grand Cherokee fourth series, discover how to correctly and manually reset the engine oil light. Firs…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos