Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the 2018 Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Service warning light

If you want to carry out the manual reset of the engine oil light on the display of the instrument panel of your 2018 Jeep Cherokee, just follow the steps described in our new guide. First of all, make sure you have recently changed the oil and filter, then go to the driver's seat inside the car and turn on the ignition by pressing the button twice in a row. Then press the accelerator pedal all the way down three times. Finally, turn off the car and the oil light reset procedure is complete.

Posted on 9 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the 2020 Jeep Cherokee
How to reset the oil light on the 2020 Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Before resetting the oil light, it is necessary to top up the new oil and replace the oil filter. Resetting the light without replacing them can caus…
How to Reset the Oil Light on the 2008 Jeep Cherokee
How to Reset the Oil Light on the 2008 Jeep Cherokee
Jeep Cherokee (2008-2012 / MK 4, KK) In this new mini guide for all of you with a fourth-generation Jeep Cherokee (2008), we will describe the various steps necessary to complete the man…
How to Reset the Oil Light on the Jeep Cherokee
How to Reset the Oil Light on the Jeep Cherokee
Jeep Cherokee (2008-2012 / MK 4, KK) Resetting the oil light on the 2010 Jeep Cherokee is really very simple and takes just a few seconds to complete the entire operation correctly. Let’…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos